Legal

Compliance and operating information

Coral Dev Board Compliance Statements

Regulatory information

The regulatory information, certification, and compliance marks can be found on your device. Manufacturer address: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043

EMC compliance statement

Important: This device, power adaptor and other in-box accessories have demonstrated Electromagnetic Compatibility (EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions or other electronic devices.

Regulatory information: United States

See the full Dev Board declaration of conformity for USA here (PDF).

FCC Regulatory Compliance

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Google could void your authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation.

Radio Frequency Exposure

This device meets the U.S. Federal Communications Commission's (FCC) requirements for exposure to radio waves and is designed and manufactured not to exceed the FCC's emission limits for exposure to radio frequency (RF) energy. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm should be maintained between the antenna of this device and persons during device operation.

Regulatory information: EU

See the full Dev Board declaration of conformity for EU here (PDF).

EU Compliance Notice

Hereby, Google LLC declares that AA1 is in compliance with Radio Equipment Directive 2014/53/EU.

Field Definition Allowed values
Y Last digit of the year of manufacture 0 to 9
M Month of manufacture 1 to 9 (Jan to Sep), A (Oct), B (Nov), C (Dec)
DD Date code of manufacture 01 to 31 (1st to 31st)
P Product code. Must be unique. A
XXXXX Number. Must be unique. Per digit, 0 to 9 and A to Z

Table 1 - Serial number decoder

Restrictions and Requirements under Directive 2014/53/EU

The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in AT, BE, BG, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IT, LT, LU, LV, MT, NL, PL, PT, RO, SE, SI, SK, UK, CH, IS, LI, NO, and TR.

Frequency Bands and Power

European Union, United Kingdom Data given here is the maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates.

Frequency Power
WiFi 2400-2483.5 MHz Max 18 dBm
WiFi 5250-5350 MHz Max 15 dBm
WiFi 5470-5725 MHz Max 15 dBm
Bluetooth: 2400-2483.5 MHz Max 10 dBm

Radio frequency interference

Google is not responsible for any radio or television interference caused by unauthorized modification of these devices or accessories, or by the substitution or attachment of connecting cables and equipment other than that specified by Google. The correction of interference caused by such unauthorized modification, substitution, or attachment is the responsibility of the user. Google and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines.

REACH

REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals, EC No 1907/2006) is the EU regulation addressing the safe production and use of chemicals. Google complies with all requirements of the regulation and we are committed to providing our customers with information about the presence of REACH Substances of Very High Concern (SVHCs). For information, you can contact Google at coral-compliance@google.com.

The point of contact for regulatory matters in the EU is Mouser Electronics, Inc., Elsenheimerstr. 11, 80687 Munich, Germany.

RoHS Compliance

This product is in compliance with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.

Manufacturer info.

Manufacturer: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA, USA, 94043

EU Importer info

Mouser Electronics, Inc., Elsenheimerstr. 11, 80687 Munich, Germany


Coral USB Accelerator Compliance Statements

Regulatory information

The regulatory information, certification, and compliance marks can be found on your device. Manufacturer address: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043

EMC compliance statement

Important: This device, power adaptor and other in-box accessories have demonstrated Electromagnetic Compatibility (EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions or other electronic devices.

Regulatory information: United States

See the full USB Accelerator declaration of conformity for USA here (PDF).

FCC Regulatory Compliance

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Google could void your authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation.

Radio Frequency Exposure

This device meets the U.S. Federal Communications Commission's (FCC) requirements for exposure to radio waves and is designed and manufactured not to exceed the FCC's emission limits for exposure to radio frequency (RF) energy. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm should be maintained between the antenna of this device and persons during device operation.

Regulatory information: EU

See the full USB Accelerator declaration of conformity for EU here (PDF).

EU Compliance Notice

Hereby, Google LLC declares that WA1 is in compliance with EMC Directive 2014/30/EU.

Field Definition Allowed values
Y Last digit of the year of manufacture 0 to 9
M Month of manufacture 1 to 9 (Jan to Sep), A (Oct), B (Nov), C (Dec)
D Date code of manufacture 1 to 9 (1st to 9th), A to X, skip ‘I’ and ‘O’ (10th to 31st)
P Product code. Must be unique. W
XXXXX Number. Must be unique. Per digit, 0 to 9 and A to Z

Table 1 - Serial number decoder

Radio frequency interference

Google is not responsible for any radio or television interference caused by unauthorized modification of these devices or accessories, or by the substitution or attachment of connecting cables and equipment other than that specified by Google. The correction of interference caused by such unauthorized modification, substitution, or attachment is the responsibility of the user. Google and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines.

REACH

REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals, EC No 1907/2006) is the EU regulation addressing the safe production and use of chemicals. Google complies with all requirements of the regulation and we are committed to providing our customers with information about the presence of REACH Substances of Very High Concern (SVHCs). For information, you can contact Google at coral-compliance@google.com.

The point of contact for regulatory matters in the EU is Mouser Electronics, Inc., Elsenheimerstr. 11, 80687 Munich, Germany.

RoHS Compliance

This product is in compliance with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.

Manufacturer info

Manufacturer: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA, USA, 94043

EU Importer info

Mouser Electronics, Inc., Elsenheimerstr. 11, 80687 Munich, Germany


Coral Camera Compliance Statements

Regulatory information

The regulatory information, certification, and compliance marks can be found on your device. Manufacturer address: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043

EMC compliance statement

Important: This device, power adaptor and other in-box accessories have demonstrated Electromagnetic Compatibility (EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions or other electronic devices.

Regulatory information: United States

See the full Camera declaration of conformity for USA here (PDF).

FCC Regulatory Compliance

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Google could void your authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.

Radio Frequency Exposure

This device meets the U.S. Federal Communications Commission's (FCC) requirements for exposure to radio waves and is designed and manufactured not to exceed the FCC's emission limits for exposure to radio frequency (RF) energy. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm should be maintained between the antenna of this device and persons during device operation.

Regulatory information: EU

See the full Camera declaration of conformity for EU here (PDF).

EU Compliance Notice

Hereby, Google LLC declares that AA1 is in compliance with Radio Equipment Directive 2014/53/EU.

Field Definition Allowed values
Y Last digit of the year of manufacture 0 to 9
M Month of manufacture 1 to 9 (Jan to Sep), A (Oct), B (Nov), C (Dec)
D Date code of manufacture 1 to 9 (1st to 9th), A to X, skip ‘I’ and ‘O’ (10th to 31st)
P Product code. Must be unique. C
XXXXX Number. Must be unique. Per digit, 0 to 9 and A to Z

Table 1 - Serial number decoder

Radio frequency interference

Google is not responsible for any radio or television interference caused by unauthorized modification of these devices or accessories, or by the substitution or attachment of connecting cables and equipment other than that specified by Google. The correction of interference caused by such unauthorized modification, substitution, or attachment is the responsibility of the user. Google and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines.

REACH

REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals, EC No 1907/2006) is the EU regulation addressing the safe production and use of chemicals. Google complies with all requirements of the regulation and we are committed to providing our customers with information about the presence of REACH Substances of Very High Concern (SVHCs). For information, you can contact Google at coral-compliance@google.com.

The point of contact for regulatory matters in the EU is Google Commerce Limited, 70 Sir John Rogerson's Quay, Dublin 2, Ireland.

RoHS Compliance

This product is in compliance with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.

Manufacturer info.

Manufacturer: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA, USA, 94043

EU Importer info

Mouser Electronics, Inc., Elsenheimerstr. 11, 80687 Munich, Germany


Coral Environmental Sensor Board Compliance Statements

Regulatory information

The regulatory information, certification, and compliance marks can be found on your device. Manufacturer address: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043

EMC compliance statement

Important: This device, power adaptor and other in-box accessories have demonstrated Electromagnetic Compatibility (EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions or other electronic devices.

Regulatory information: United States

See the full Environmental Sensor Board declaration of conformity for USA here (PDF).

FCC Regulatory Compliance

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Google could void your authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.

Radio Frequency Exposure

This device meets the U.S. Federal Communications Commission's (FCC) requirements for exposure to radio waves and is designed and manufactured not to exceed the FCC's emission limits for exposure to radio frequency (RF) energy. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm should be maintained between the antenna of this device and persons during device operation.

Regulatory information: EU

See the full Environmental Sensor Board declaration of conformity for EU here (PDF).

EU Compliance Notice

Hereby, Google LLC declares that AA1 is in compliance with Radio Equipment Directive 2014/53/EU.

Field Definition Allowed values
Y Last digit of the year of manufacture 0 to 9
M Month of manufacture 1 to 9 (Jan to Sep), A (Oct), B (Nov), C (Dec)
D Date code of manufacture 1 to 9 (1st to 9th), A to X, skip ‘I’ and ‘O’ (10th to 31st)
P Product code. Must be unique. I
XXXXX Number. Must be unique. Per digit, 0 to 9 and A to Z

Table 1 - Serial number decoder

Radio frequency interference

Google is not responsible for any radio or television interference caused by unauthorized modification of these devices or accessories, or by the substitution or attachment of connecting cables and equipment other than that specified by Google. The correction of interference caused by such unauthorized modification, substitution, or attachment is the responsibility of the user. Google and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines.

REACH

REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals, EC No 1907/2006) is the EU regulation addressing the safe production and use of chemicals. Google complies with all requirements of the regulation and we are committed to providing our customers with information about the presence of REACH Substances of Very High Concern (SVHCs). For information, you can contact Google at coral-compliance@google.com.

The point of contact for regulatory matters in the EU is Google Commerce Limited, 70 Sir John Rogerson's Quay, Dublin 2, Ireland.

RoHS Compliance

This product is in compliance with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.

Manufacturer info.

Manufacturer: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA, USA, 94043

EU Importer info

Mouser Electronics, Inc., Elsenheimerstr. 11, 80687 Munich, Germany

More info and help


Still have questions? We’re here to help.

Please mail our support team for technical support, product guidance, general questions, and to share any feedback you have.

We try to respond to inquiries within one business day – but often you’ll get a response even quicker, usually a few hours.

Do you have a question about large volume or bulk sales? Contact our sales team through the sales form and we’ll get back to you ASAP.